Biomechanical comparison of stemless humeral components in total shoulder arthroplasty

BackgroundThe purpose of this study was to compare initial fixation strength between various stemless and stemmed humeral components and to correlate implant fixation strength with bone mineral density (BMD).MethodsFive humeral stem designs were investigated: Stemless-A (four hollow fins), Stemless-B (central body, three solid fins), Stemless-C (central screw, peripheral rim-fit), Short stem (50 mm), and Standard stem (130 mm). Fifty cadaveric human humerii were obtained and divided into five groups. BMD within the humeral head was determined for all samples. The mean BMD was similar between groups. The 25 samples with the lowest and highest BMDs were categorized as “Low” and “High,” respectively, with a BMD threshold of 0.35 g/cm², creating BMD subgroups. After implantation, each sample underwent a standardized biomechanical testing protocol, with axial loading followed by torsional loading. Sensors attached to the specimen recorded micromotion throughout testing. Axial loading consisted of cyclic loading for 100 cycles at 3 peak forces (220, 520, and 820 N). Torsional loading consisted of 100 cycles of internal/external rotation at 0.1 Hz at 6 peak torques, or until failure (±2.5, 5, 7.5, 10, 12.5, and 15 Nm). Failure was defined as the torque at which any bone fracture, implant detachment from anchor/stem, or an excess of 50° internal/external rotation occurred. Groups and BMD subgroups were compared.ResultsAt maximal axial loading, Stemless-B demonstrated greater micromotion (540 μm) than Stemless-C (192 μm) (P = .003). Stemless-B and Stemless-A (387 μm) also had greater micromotion than Short stem (118 μm, P < .001, P = .03) and Standard stem (85 μm, P < .001, P = .01). When comparing low-BMD samples at maximal axial loading, these differences were accentuated, but comparison of high-BMD samples showed no significant differences between groups. Torsional testing demonstrated that Standard stem failed at greater torque (7.2 Nm) than Stemless-B (2.3 Nm, P < .001), Stemless-A (1.9 Nm, P < .001), and Stemless-C (3.9 Nm, P = .01). When comparing torsional testing results of low-BMD samples, both Standard stem and Short stem failed at greater torque than Stemless-B (P = .02, P = .003) and Stemless-A (P = .03, P = .004) but failed at a similar torque to Stemless-C. Torsional testing of high-BMD samples showed that Standard stem failed at a greater torque than all stemless designs.ConclusionStemless humeral implants should be used with caution in low-BMD settings (<0.35 g/cm²). A central screw and peripheral rim-fit stemless anchor design demonstrated greater fixation strength at low BMD when compared with other designs, while all stemless designs performed similarly at high BMD.Level of evidenceBasic Science Study; Cadaveric Study     

Association between the intensity of obstructive sleep apnea and skeletal alterations in the face and hyoid bone

IntroductionThe association between the intensity of obstructive sleep apnea and skeletal alterations in the face and hyoid bone is still scarcely addressed in the literature.ObjectiveTo evaluate whether the intensity of obstructive sleep apnea is associated with craniofacial alterations and the position of the hyoid bone in children with mixed dentition.Methods76 children aged 7 to 10 years old were examined by otorhinolaryngological evaluation, polysomnography, and orthodontic assessment, including cephalometry. The participants were divided in 3 groups: primary snoring, mild obstructive sleep apnea and moderate to severe obstructive sleep apnea. Cephalometric measures of the face and hyoid bone were assessed. These measures were compared among the different groups by unpaired Student's t test. Moreover, these measures were correlated with the patient's obstructive apnea and hypopnea index variable using Pearson's correlation test.ResultsOf the 76 children, 14 belonged to group 1, with primary snoring; 46 to group 2, with mild obstructive sleep apnea; and 16 to group 3, with moderate-severe obstructive sleep apnea. There was no difference between the groups regarding the craniofacial variables. Children with obstructive sleep apnea showed a longer distance from the hyoid bone to the mandibular plane when compared to the primary snoring group (p < 0.05). Between the two obstructive sleep apnea subgroups, patients with moderate or severe disease showed significantly shorter horizontal distance between the hyoid bone and the posterior pharyngeal wall (p < 0.05), when compared to the groups with mild obstructive sleep apnea. We also observed a significant positive correlation between obstructive apnea and hypopnea index and the distance from the hyoid to the mandibular plane (p < 0.05) as well as a significant negative association between obstructive apnea and hypopnea index and the horizontal distance from the hyoid to the posterior pharyngeal wall (p < 0.01).ConclusionWe did not observe any association between obstructive sleep apnea and linear lateral alterations of the face. In contrast, there is a direct association between obstructive sleep apnea severity and the inferior and posterior position of the hyoid bone in children aged 7 to 10 years old.     

续筋接骨方治疗骨折临床观察

目的研究续筋接骨方治疗骨折的临床疗效。方法选取2018年1月—2018年6月在辽宁中医药大学附属第三医院就诊的骨折患者60例,所有患者按照随机数字表法分为对照组与观察组,每组30例。观察组口服续筋接骨方联合正骨后小夹板固定治疗,对照组患者采用正骨后小夹板固定治疗。分析2组患者干预3个月后的血清骨代谢指标、骨密度、生活质量改善情况以及疗效判定。结果干预前,2组的血清Ⅰ型前胶原羧基端肽β特殊序列(β-CTX)、血清Ⅰ型前胶原氨端肽原(PINP)、骨特异性碱性磷酸酶(ALP)水平、钙、磷及骨密度比较,差异无统计学意义(P>0.05);干预后,2组的β-CTX、PINP、骨特异性ALP水平、钙、磷及骨密度较干预前改善,观察组的改善效果优于对照组,差异均有统计学意义(P<0.05)。干预前,2组的物质生活、社会功能、躯体健康以及心理健康评分比较,差异无统计学意义(P>0.05);干预后,2组的物质生活、社会功能、躯体健康以及心理健康评分较干预前升高,观察组的各项生活质量评分高于对照组,差异均有统计学意义(P<0.05)。观察组的治疗恢复率高于对照组,差异有统计学意义(P<0.05)。结论续筋接骨方可以改善骨折患者骨代谢功能及生活质量。     

Synthetic MRI is not yet ready for morphologic and functional assessment of patellar cartilage at 1.5 Tesla

PurposeThe purpose of this study was to compare morphologic assessment and relaxometry of patellar hyaline cartilage between conventional sequences (fast spin-echo [FSE] T2-weighted fat-saturated and T2-mapping) and synthetic T2 short-TI inversion recovery (STIR) and T2 maps at 1.5 T magnetic resonance imaging (MRI).MethodThe MRI examinations of the knee obtained at 1.5 T in 49 consecutive patients were retrospectively studied. There were 21 men and 28 women with a mean age of 45 ± 17.7 (SD) years (range: 18–88 years). Conventional and synthetic acquisitions were performed, including T2-weighted fat-saturated and T2-mapping sequences. Two radiologists independently compared patellar cartilage T2-relaxation time on conventional T2-mapping and synthetic T2-mapping images. A third radiologist evaluated the patellar cartilage morphology on conventional and synthetic T2-weighted images. The presence of artifacts was also assessed. Interobserver agreement for quantitative variables was assessed using intraclass correlation coefficient (ICC).ResultsIn vitro, conventional and synthetic T2 maps yielded similar mean T2 values 58.5 ± 2.3 (SD) ms and 58.8 ± 2.6 (SD) ms, respectively (P = 0.414) and 6% lower than the expected experimental values (P = 0.038). Synthetic images allowed for a 15% reduction in examination time compared to conventional images. On conventional sequences, patellar chondropathy was identified in 35 patients (35/49; 71%) with a mean chondropathy grade of 4.8 ± 4.8 (SD). On synthetic images, 28 patients (28/49; 57%) were diagnosed with patellar chondropathy, with a significant 14% difference (P = 0.009) and lower chondropathy scores (3.7 ± 4.9 [SD]) compared to conventional images. Motion artifacts were more frequently observed on synthetic images (18%) than on conventional ones (6%). The interobserver agreement was excellent for both conventional and synthetic T2 maps (ICC > 0.83). Mean cartilage T2 values were significantly greater on synthetic images (36.2 ± 3.8 [SD] ms; range: 29-46 ms) relative to conventional T2 maps (31.8 ± 4.1 [SD] ms; range: 26-49 ms) (P < 0.0001).ConclusionDespite a decrease in examination duration, synthetic images convey lower diagnostic performance for chondropathy, greater prevalence of motion artifacts, and an overestimation of T2 values compared to conventional MRI sequences.     

Thinned-out skin paddle versus collagen matrix as an optimized peri-implant soft tissue following fibula osteoseptocutaneous free flap: 3-year retrospective study

The objective of this study was to compare the implant longevity following two methods of peri-implant soft tissue optimization following free fibula flap (FFF): thinning of skin paddle (SP) and collagen matrix (CM). All patients who underwent rehabilitation with dental implants after mandibular reconstruction with FFF between June 2009 to May 2014 were retrospectively reviewed. Two methods of peri-implant soft tissue optimization were applied: (1) SP group, (2) CM group. Outcome measurements were: modified plaque index (mPI), modified sulcus bleeding index (mSBI), probing depth (PD), marginal bone loss (MBL), implant success rate and complication rates. A total of 24 patients with 69 implants were included in the study, with 8.7% (n = 6) of implants lost in 3 years. No statistically significant difference was found regarding the outcome measurements in both groups. Failed implants presented with statistically significant higher mPI, mSBI, PD and MBL scores during prosthesis delivery and subsequent follow-ups (P<0.03). In the SP group, one patient experienced SP necrosis which later underwent soft tissue optimization using CM. CM is an alternative peri-implant soft tissue, while thinning of SP is feasible if thickness is well controlled.